IV Bag setup

1. Using a piece of 1" x 4" wood, shape it to the hull.

2. Cut a flat on the bottom

3. Drill a hole through the block

4. Insert the blind nut

5. Glue the block in using Shoo Goo

6. Once all is in place drill a hole for the tube to go through the stringer.

(if there is an angle on the pick up, it will puncture the bag or pinch off flow)

---

Maintenance:

1. Keep about 1/8 full during storage, it will get brittle if stored empty.

2. Do not store very long with much fuel in bag, it will expand and pop.

3. Be sure not to leave full very long prior to running, it will pop (happens pretty fast in the heat)

4. Check for sharp objects around bag.

5. Burp all air prior to running, it will stall the engine.

A well kept bag will last a long time, but is recommended changing once a season.